APC BACK-UPS ES BE650R 8 Outlet 650VA 120V UPS System

• Output Power Capacity: 390 Watts / 650 VA, Max Configurable Power: 390 Watts / 650 VA, Nominal Output Voltage: 120V
• Typical recharge time: 16 hour(s), Replacement battery cartridge: RBC17
• Typical Backup Time at Half Load: 15.4 minutes (195 Watts)
• Typical Backup Time at Full Load: 4.2 minutes (390 Watts)
• Control panel: LED status display with On Line; On Battery; Replace Battery and Building Wiring Fault
• Audible Alarm: Alarm when on battery; distinctive low battery alarm; overload continuous tone alarm

APC BACK-UPS BR900 900VA/540W UPS System

S P A C E R

Output Power Capacity: 540 Watts / 900 VA, Max Configurable Power: 540 Watts / 900 VA Nominal Output Voltage: 120V and Cord Length: 6 feet Typical Backup Time at Half Load: 17.6 minutes (270 Watts) Typical Backup Time at Full Load: 5.3 minutes (540 Watts) Typical recharge time: 8 hour(s) Interface Port(s): USB Control panel: LED status display with On Line; On Battery; Replace Battery and Overload indicators Audible Alarm: Alarm when on battery; distinctive low battery alarm; configurable delays

APC BACK-UPS RS BR1500 1500VA/865W UPS System

S P A C E R

Output Power Capacity: 865 Watts / 1500 VA, Max Configurable Power: 865 Watts / 1500 VA Nominal Output Voltage: 120V Typical Backup Time at Half Load: 12.4 minutes (432.5 Watts) Typical Backup Time at Full Load: 3.7 minutes (865 Watts) Interface Port(s): USB Control panel: LED status display with On Line, On Battery, Replace Battery and Overload indicators Audible Alarm: Alarm when on battery, distinctive low battery alarm, configurable delays Dataline protection: RJ-11 Modem/Fax/DSL protection (two wire single line),RJ45 10 Base-T Ethernet protection

APC Smart-UPS SUA1500 1500VA USB & Serial 120V UPS System

• Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Protects connected loads from surges, spikes, lightning, and other power disturbances.
• Prolongs battery life by regulating the charge voltage according to battery temperature.
• Automatically starts up the connected equipment upon the return of utility power.
• Periodic battery self-test ensures early detection of a battery that needs to be replaced. • Monitor and control the UPS remotely via included PowerChute software or APC Network Management Card (included in all models above 3kVA).
• Customize UPS capabilities with management cards.
• Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
• Enables quick understanding and response to visual indicators showing UPS status.
• Provides management of the UPS via a serial port.
• Warns when a battery is not available to provide backup power.
• Enables centralized management via the APC InfraStruXure Manager.

APC Smart-UPS SUA1500RM2U 1500VA USB&Serial 2U Rackmount UPS Sys

Award-winning Smart-UPS® is the perfect UPS for protecting business critical servers, voice and data networks, point of sale, retail/bank back office and ATM's. High real power output (watts), generous runtime, sine wave output, 16-segment LED visual display, and intelligent battery management make Smart-UPS the leading server class UPS. Included PowerChute® management software provides IT administrators the comfort of safe system shutdown and advanced UPS management. Additional manageability is available through the SmartSlot, an internal accessory slot that allows installation of optional accessories to enhance the performance of your UPS.

• Typical Backup Time at Half Load: 26.5 minutes (490 Watts)
• Typical Backup Time at Full Load: 7.4 minutes (980 Watts)
• Control panel: LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays

APC Smart-UPS SUA2200RM2U 2200VA USB&Serial 2U Rackmount UPS Sys

This APC Smart-UPS XL protects your data by supplying reliable, network-grade power with scalable run-time in a 3U rackmount form factor. With optional, matching battery packs, run-time can be easily extended and optimized for the application. The APC Smart-UPS XL can be configured with up to 10 additional battery packs for run-times that exceed 24 hours, if necessary. The convergence of voice and data networks is placing higher demands on availability expectations - and the Smart-UPS XL delivers. Voice over Internet Protocol (VoIP), e-commerce, WiFi ("hotspots", WLAN/ WWAN, and mixed wireless), and data enabled PBX's are a few of the applications driving the need for the APC Smart-UPS XL. It is also the perfect choice for file servers (Intel or UNIX based), minicomputers, network switches and hubs, ATM's, telecommunications systems and other mission-critical applications requiring longer runtime.

• Typical Backup Time at Half Load: 15.7 minutes (990 Watts)
• Typical Backup Time at Full Load: 5.2 minutes (1980 Watts)
• Control panel: LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays
• Interface Ports: DB-9 RS-232, SmartSlot, USB

APC Smart-UPS SUA3000 3000VA USB&Serial 120V UPS System

S P A C E R

Output Power Capacity: 2700 Watts / 3000 VA Max Configurable Power: 2700 Watts / 3000 VA Output Connections: 8x NEMA 5-15R; 2x NEMA 5-20R Typical Backup Time at Half Load: 13.6 minutes (1350 Watts) Typical Backup Time at Full Load: 5.5 minutes (2700 Watts) Control panel: LED status display with load and battery bar-graphs and On Line; On Battery; Replace Battery; and Overload Indicators Audible Alarm: Alarm when on battery; distinctive low battery alarm; configurable delays Emergency Power Off (EPO): Weight: 116.25 lbs / 52.73 kg